DPM SOLUTIONS INC. ©  All Rights Reserved  TRADING TERMS

PHONE :(902)530-3520

DESIGN-PROVE-MACHINE

E-MAIL DPMSolutionsInc@gmail.com

DPM SOLUTIONS INC.

CUSTOM MACHINED SPECIALIZED EQUIPMENT

2011

Dal. Paper

What’s New at DPM Solutions Inc.

Click on the picture to read the Dalhouse University Article  by Kaite McDonald entitled:

 

“Dal professor making waves in Lithium-ion battery research... “

<<BACK

This Ternary table has been manufactured for a sputtering system to be used by a research group in Germany.

Our customer needed 2mm frits crimped into the end of plug flow reactor tubes. These tubes can be made with or with out a taper.

News Paper Article

Click Article to Enlarge

To view other years click on the year.

2013

2012

2010

DPM Solutions Inc. was nominated for an Export Achievement Award. Click on the icon below to see the interview with Simon.

Coin-cell opener to allow you to retrieve electrode materials without shorting your cells.

 

Lifetime predictions for Li-ion cells are very important when selecting  electrode materials and electrolyte additives.

 

DPM Solutions 400 series chargers can be used to help predict cell lifetimes without having to run cells for 1000’s of cycles. The 400 series models are based on the principles required to accurately measure coulombic efficiencies outlined by the Dahn group (JES 157 A 196, 2010) at Dalhousie University

The blue box on top of the Arbin in this picture is used for long term storage of batteries at a pre-selected temperature between 30 and 60 degrees centigrade.

 

We recently supplied 7 C.S.A. approved DPM-110’s to a Canadian research group.

 

 

 

Use our button-cell crimpers in your glove box to produce top quality, well sealed coin cells for your research.

DPM-110 above ARBIN

 

Sputtering Equipment>>

Plug Flow Reactor Tubes>>

Battery Research>>

Coin Cell Crimper>>

Coin Cell Opener>>